Relubricatable heavy-duty design Rod Ends - CETOP-Norm

Common features

Friction pearing: steel on heavy duty bronze
Thread: DIN13-6H, r.h. or l.h. (thread designation SFLC..CETOP)
Lubricating nipple: Size 5-50 funnel-type DIN 3405, form D

Series SFC..CETOP (standard)

Outer part up to size 14: free cutting steel 1.0718
Outer part up to size 16: material 1.0501, galvanized and chromalized t DIN 50961
Bushings: Cu Sn 8/Cu Zn 40 Al 2 F59, 2.0550.31
Inner ring: Roller bearing steel 1.3505, hardened, ground and polished

Series SFXC..CETOP (high-strength)

Outer part: Material 1.7225 tempered or similar, galvanized and chromalized to DIN 50961.
Bushings: As for SFC
Inner ring: As for SFC

Series SFRC..CETOP (rustproof)

Outer part: Stainless steel 1.4305, from size 16, forged.
Bushings: As for SFC
Inner ring: hard-chromed; if required stainless steel.

Bearing slackness

Depending on size between 0.01 and 0.09 mm radially. With reduced or increased slackness

Drawing

Design

• Stainless inner ring:
  Order designation: SFC xx IH CETOP
• Hard-chromed inner ring: Werkstoff 1.4034
  Order designation: SFC xx IR CETOP
• Hard-chromed outer part and inner ring:
  Order designation: SFC xx H CETOP

Sealed design

Sizes 8–30 can be supplied with replace­ able sealing sleeves
Specification Abdichtung (..2RS)

Threaded bolts for Rod Ends

All series of rod ends and spherical bearings can be fitted with threaded bolts and used as angle joints.
Specification Gewindebolzen (..W)