Application

Fast, precise clamping and referencing of devices and components on EDM machines, all metal cutting machine tools, CNC machining centers, and measuring equipment.

Advantages of System 9000

Experience higher productive machining time due to the full-time parallel setup of fixtures and workpiece blanks on universal (even automatic) exchangeable pallets and holders.

Common Characteristics

  • Outer diameter - 129 mm
  • Repetitive accuracy ≤ 0.005 mm
  • 1000 kg axial load per clamper
  • Spring tension clamping force, pneumatic or hydraulic opening
  • Circumferential sealing and air flow to protect against pollution
  • Integrated X-, Y- and Z-referencing
  • Ant-vibration

Clampers - Series H9001..

H 9001PI0K Pneumatic Clamper  
NBR seals without radial slots, for multiple use only.
Spring tension clamping force - 10000 N (2,248 Ibs.)
Repetitive accuracy ≤ 0.005 mm
Pneumatic pressure for opening - 6 bar
Max. axial load - 1000 kg


H 9001PVI0K Pneumatic Clamper 
Same as H9001PI0K but with Viton® seals for sinking EDM machine applications.


H 9001HI0K Hydraulic Clamper
Same as H9001PVI0K but requires hydraulic pressure for opening. Spring tension clamping force - 26000 N.
H 9001PI4K Pneumatic Clamper 
NBR seal with four radial slots for 90° indexing.
Spring tension clamping force - 10000 N (2,248 Ibs.)
Repetitive accuracy ≤ 0.005 mm
Pneumatic pressure for opening - 6 bar
Max. axial load - 1000 kg


H 9001PVI4K Pneumatic Clamper 
Same as H9001PI4K but with Viton® seals for sinking EDM machine applications.
 

H 9001HI4K Hydraulic Clamper
Same as H9001PVI4K but with hydraulic pressure for opening.
Spring tension clamping force- 26000 N
Hydraulic pressure for opening - min. 20 - max. 50 bar
H 9040 Set of Toe Clamps (4 pcs.)
Toe clamps including M12x45 screws for mounting the H9001xxx series clampers on the machine table.



Integrated Clampers H9003...K - outer diameter 129 mm

These clampers come ready to be integrated into devices like pallet bases, tombstones, machine tool tables, etc. They can be mounted with the clamping surface projected above or even with the device surface.
Clampers with Viton® seals (H9003PVIxK) can be used for single or multiple clamping of workpieces in sinking EDM machine applications.
Due to their modular design, the quantity and center distance of the clampers can be customized for the clamping task by machine size, size and weight of workpiece, processing forces, etc.

H 9003PI0K Integrated Pneumatic Clamper
Pneumatic clamper with NBR seal, without radial slots for multiple use only.
Spring tension clamping force - 10000 N (2,248 Ibs.)
Repetitive accuracy ≤ 0.005 mm
Pneumatic pressure for opening - 6 bar
Max. axial load - 1000 kg

H 9003PVI0K Integrated Pneumatic Clamper
Same as H9003PI0K but with Viton® seals for sinking EDM machine applications.

H 9003HI0K Integrated Hydraulic Clamper
Same as H9003PVI0K but requires hydraulic pressure for opening.
Spring tension clamping force - 26000 N
Hydraulic pressure for opening - min. 20 - max. 50 bar
H 9003PI4K Integrated Pneumatic Clamper
Pneumatic clamper with four radial slots for 90° indexing, NBR seal.
Spring tension clamping force - 10000 N (2,248 Ibs.)
Repetitive accuracy ≤ 0.005 mm
Pneumatic pressure for opening - 6 bar
Max. axial load - 1000 kg

H 9003PVI4K Integrated Pneumatic Clamper
Same as H9003PI4K but with Viton® seals for sinking EDM machine applications.

H 9003HI4K Integrated Hydraulic Clamper 
Same as H9003PVI4K but requires hydraulic pressure for opening.
Spring tension clamping force - 26000 N
Hydraulic pressure for opening - min. 20 - max. 50 bar
H9020 Calibration Ring
Used to calibrate the height of H9003...integrated clampers, when flush mounted.

Clamping Bases in G-Alu340

Carl Hirschmann offers standard clamping bases with two, four, or six integrated clampers. The bases can be readily secured to a machine table by toe clamping or integral screws located above the table slots. Standard height of the clamping bases is 50 mm (Z-surface). Standard clamper centerline distances are between 200 and 250 mm. Other distances and clamper configurations are available on request.

Common Characteristics

  • Repetitive accuracy ≤ 0.005 mm
  • 1000 kg axial load per clamper
  • Spring tension, pneumatic pressure for opening
  • Reference surface aligns to clamping base
  • Integrated fastening holes for T-slots in 63, 100, and 125 mm distances.
H93P.20.20K 2-position Clamping Base
With two pneumatic clampers H9003PI0K.
Clamper centerline distance D = 200 mm
Dimensions (LxB) 370 x 180 mm
Clamping force (2 x 10000 N) - 20000N (4,496 Ibs.)
Pneumatic pressure for opening - 6 bar
Max. axial load - (2 x 1000 kg) 2000 kg

H93P.20.25K 2-position Clamping Base
Same as H93P.20.20K but with clamper centerline distance D = 250 mm.
Dimensions (LxB) 420 x 180 mm
H93P.40.20K 4-position Clamping Base
With four pneumatic clampers H 9003PI0K,
Clamper centerline distance D = 200 mm
Clamping force (4 x 10000 N) - 40000N (8,992 Ibs.)
Dimensions (LxB) 390 x 350 mm
Pneumatic pressure for opening - 6 bar
Max. axial load - (4 x 1000 kg) 4000 kg

H93P.40.25K 4-position Clamping Base
Same as H93P.40.20K but with clamper centerline distance D = 250 mm.
Dimensions (LxB) 440 x 400 mm

H 93P.60.20K 6-position Clamping Base
With six pneumatic clampers H9003PI0K.
Clamper centerline distance D = 200 mm
Clamping force (6 x 10000 N) - 60000N (13,488 Ibs.)
Dimensions (LxB) 590 x 350 mm
Pneumatic pressure for opening - 6 bar
Max. axial load - (6 x 1000 kg) 6000 kg

H93P.60.25K 6-position Clamping Base
Same H93P.60.20K but with clamper centerline distance D = 250 mm.
Dimensions (LxB) 690 x 400 mm

Additional centerline distances and clamper configurations available upon request.

Risers in G-Alu

Risers are distance units for raised clamping of workpieces. They are mainly used for horizontal or 5-axis machining.

H93P.14.20K-15 Single Riser
Including pneumatic clamper H9003PI4K with centering and adjusting journals
(H9030.1K and H9031.1K).
Positioning accuracy ≤0.005 mm
Height - 150 mm
Clamping journal centerline distance - 200 mm
Clamping force - 10000N (2,248 Ibs.)
Pneumatic pressure for opening - 6 bar
Max. axial load - 1000 kg

H 93P.1014.20K-15 Double Riser
Including two pneumatic clampers (1x H9003PI4K and 1x H9003PI0K),
centering and adjusting journals (H9030.1K and H9031.1K).
Positioning accuracy ≤0.005 mm
Height - 150 mm
Clamping journal centerline distance - 200 mm
Clamping force (2 x 10000 N) - 20000N (4,496 Ibs.)
Pneumatic pressure for opening - 6 bar
Max. axial load - 1000 kg

Compact Clampers H9001S.. - Outer diameter 90 mm




H9001SPI0K Pneumatic Clamper
Without radial slots for multiple use only, with NBR seals.
Spring tension clamping force - 3500 N
Clamping force with pneumatic assistance - 9500 N
Repetitive accuracy ≤ 0.005 mm
Pneumatic pressure for opening - 6 bar
Max. axial load - 1000 kg

H9001SPI0K.5 Pneumatic Clamper
Same as H9001SPI0K but with higher clamping force.
Spring tension clamping force - 7000 N
Pneumatic pressure for opening - 11 bar

H9001SPI4K Pneumatic Clamper 
Same as H9001SPI0K but with four radial slots for 90° indexing.

H 9001SPI4K.5 Pneumatic Clamper 
Same as H9001SPI0K.5 but with four radial slots for 90° indexing.

Integrated Compact Clampers H9003S.. - Outer diameter 90 mm

H9003SPI0K Integrated Pneumatic Clamper
Without radial slots for multiple use only, with NBR seals.
Spring tension clamping force - 3500 N
Clamping force with pneumatic assistance - 9500 N
Repetitive accuracy ≤ 0.005 mm
Pneumatic pressure for opening - 6 bar
Max. axial load - 1000 kg

H 9003SPI0K.5 Integrated Pneumatic Clamper
Without radial slots for multiple use only, with NBR seals.
Spring tension clamping force - 7000 N
Repetitive accuracy ≤ 0.005 mm
Pneumatic pressure for opening - 11 bar
Max. axial load - 1000 kg
H9003SPI4K Integrated Pneumatic Clamper
Same as H9003SPI0K but with four radial slots for 90° indexing.

H 9003SPI4K.5 Integrated Pneumatic Clamper
Same as H9003SPI0K.5 but with four radial slots for 90° indexing.



Clampers are available also with Viton® seals for applications in sinking EDM.

Clampers Accessories

H9050K Alignment Gauge
Used to align H9001xx4K, H9003xx4K, and “S” version clampers in X- and Y-direction.
Distance between dowel pins and center – 38 and 58 mm.

H9050SK Alignment Gauge
Used to align H9001Sxx4K and H9003Sxx4K clampers in X- and Y-direction.
Distance between dowel pin and center - 38 mm

H9025K Cover
Cover with H9032.1K clamper journal.
Protects the seal and clamping area of H9001xxx and H9003xxx while clampers are not used.


H9025SK Cover for Compact Clampers
Cover for clamper series H900xS..K, with clamping journal.
Protects the seal and clamping area of the compact while clampers are not in use.
 

H9026K Sealing Journal
With blind hole Ø15 and thread M5 for removing from clamper.
Protects the seal and clamping journal area of the compact clampers while not in use.
 

H9060P Pneumatic Service Unit
Filter, dryer, oiler, and pressure regulator unit with separate adjustment for clamping (6 bar) and blocking air.

H9061P Pneumatic Control Unit
For manual opening and closing of pneumatic clampers H9001P...
and H9003P...
Max. input pressure - 7 bar

H9062P Foot Switch
For manual opening and closing of pneumatic clampers H9001P...
and H9003P...
Max. input pressure - 7 bar



H9070H Hydraulic Unit (without picture)
For operating hydraulic clampers H9001H.. /H9003H...
Hydraulic pressure - 40 bar
Operating voltage - 230V/400W

Clamping Journals

H9030.1K Centering Journals
Clamping and centering journals (X-, Y-positioning). One required per set-up. Includes one M12x30 DIN912 screw (strength class 10.9) and one M12x25 DIN939 stud screw (strength class 10.9).

H9031.1K Compensating Journals (two-pieces)
Clamping and locating journal used for radial alignment when two or more clampers are used for one fixture. One required per multiple clamper fixture.
Includes one M12x30 DIN912 screw (strength class 10.9) and one M12x25 DIN939 stud screw (strength class10.9).

H9032.1K Clamping Journals
Clamping journals without alignment. Used for clamping when three or more clampers are used for one fixture. Required for the third and additional clampers.
Includes one M12x30 DIN912 screw (strength class10.9) and one M12x25 DIN939 stud screw (strength class10.9).
H9031.4K Compensating Journal (one-piece)
Low cost clamping and locating journal (positioning in one direction).
Includes one M12x30 DIN912 screw (strength class 10.9).
Screwing only from above.

Pallets in G-Alu25




Aluminum pallet for single pneumatic clampers, including one H9030.1K journal and two pins. Dimensions (LxB) 180 x 180 mm
Parallelism - 0.1 mm
Weight approx. 3 kg


H9.3818.20K Pallet
Aluminum pallet for pneumatic clampers, including one H9030.1K and one H9031.1K journal. Dimensions (LxB) 380 x 180 mm
Journals centerline distance - (D) 200 mm
Parallelism - 0.1 mm
Weight approx. 6 kg
H9.3838.20K Pallet
Aluminum pallet for pneumatic clampers, including one H9030.1K, and H9031.1K,
and two H9032.1K journals.
Dimensions (LxB) 380 x 380 mm
Journal centerline distance - (D) 200 mm
Parallelism - 0.1 mm
Weight approx. 13 kg

Clamping Towers

Clamping towers are available in various designs upon request.

Special solutions

Carl Hirschmann offers also special solutions for your individual clamping challenges.