A presetting station allows precise clamping and presetting of workpieces while the machine is in operation. Set-up parallel to production time increases run-time efficiency and therefore reduces amortization time of the machine.

H4900 Set-up and Presetting Station

The presetting work station is delivered complete in a sturdy stainless-steel trolley and a granite surface plate 500 x 500 mm (19.7" x 19.7") of accuracy class 00. A Clamper H4000 is mounted on the granite plate on a riser. A small reference column (same height as the riser) used to support the workpieces while presetting them, is also included. The opposite guide beam, aligned parallel to the clamper, serves as a reference wall for the surface gauge.


Configuration:
  • 1x steel carriage
  • 1 x hard granite measuring plate
  • 1 x clamper H4000
  • 1 x reference disc (to support workpieces)
  • 1 x reference bar (stop for dial gouge column, orientated parallel to clamper H4000)
Dimensions (LxWxH)           approx. 680x580x1100 mm

H4900.1 Set-up and Presetting Station

Designed like H4900 but without reference bar.

H4901 Set-up and Presetting Station

Designed like H4900 but without steel carriage.

H4901.1 Set-up and Presetting Station

Designed like H4901 but without reference bar.

H4905 Presetting Cube

Granite presetting cube is used on a larger granite plate together with the reference column. Includes the H4000 clamper and the reference column. It can be placed on two sides ground to the H4000, and is suitable for presetting small workpieces.
Dimensions (LxWxH) approx. 150 x 150 x 200 mm (5.91" x 5.91" x 7.88")