Universal application at high alternating and shock loads in radial and axial directions. Suitable for large swings. Vmax = 60 m/min.
Common features
Friction pairing: Steel/PTFE bronze fabricfemale thread: DIN13-6H, right or left (left thread: SFLCP..CETOP)
Series SFCP..CETOP
Outer part: Up to size 14 free-cutting steel 1.0718, from size 16 material 1.0501, galvanized and chromalized to DIN 50961.Bushings: Cu Sn 8/Cu Zn 40 Al 2 F59, galvanized, lined with permanently affixed sliding foil, consisting of PTFE with a bronze supporting fabric.
Inner ring: Roller bearing steel 1.3505, hardened, ground and polished.
Series SFXCP..CETOP (high-strength)
Available from size 5Outer part: Material 1.7225 tempered or similar, galvanized and chromalized to DIN 50961.
Bushings: As for SFCP..
Inner ring: As for SFCP..
Series SFRCP..CETOP (rustproof)
Available from size 3Outer part: Stainless steel 1.4305, from size 16 forged.
Lagerschalen: As for SFCP (if required stainless steel.)
Inner ring: hard-chromed; if required stainless steel
Bearing slackness
Depending on size, between 0,005 and 0,020 mm radially.Drawing
Design
- Stainless inner ring:
Order designation: SFCP xx IH CETOP - Hard-chromed inner ring:
Order designation: SFCP xx IR CETOP - Hard-chromed outer part and inner ring:
Order designation: SFCP xx H CETOP
Sealed design
Sizes 8–30 can be supplied with replace able sealing sleevesSpecification Abdichtung (..2RS)
Threaded bolts for Rod Ends
All series of rod ends and spherical bearings can be fitted with threaded bolts and used as angle joints.Specification Gewindebolzen (..W)