Maintenance free heavy-duty Rod Ends with male thread - DIN/ISO 12240-N

Productseries SMCP.., SMXCP.., SMRCP..

Universal application at high constant loads and low alternating and shock loads in axial and radial directions. For difficult lubrication conditions, high running speeds and large swings. Vmax = 60 m/min.

Common features

Friction pairing: Steel/PTFE bronze fabric.
female thread: DIN13-6H, right or left (left thread: SFLCP..)

Series SMCP..

Outer part: Up to size 14 free-cutting steel 1.0718, from size 16 material 1.0501, galvanized and chromalized to DIN 50961.
Bushings: Cu Sn 8/Cu Zn 40 Al 2 F59 galvanized, lined with permanently affixed sliding foil, consisting of PTFE with a bronze supporting fabric.
Inner ring: Roller bearing steel 1.3505, hardened, ground and polished.

Series SMXCP.. (high-strength)

Available from size 5
Outer part: Material 1.7225 tempered or similar, galvanized and chromalized to DIN 50961.
Bushings: As for SMCP..
Inner ring: As for SMCP..

Series SMRCP.. (rustproof)

Available from size 3
Outer part: Stainless steel 1.4305, from size 16 forged.
Bushings: As for SMCP.., if required stainless steel.
Inner ring: As for SMCP.. but hard-chromed; if required stainless steel.

Bearing slackness

Depending on size, between 0.002 and 0.020 mm radially.

Tabelle Produktdetails Gelenkköpfe Serie SMCP

Drawing

SMCP_DRW


Design

  • Stainless inner ring:
    Order designation: SMCP xx IH
  • Hard-chromed inner ring:
    Order designation: SMCP xx IR
  • Hard-chromed outer part and inner ring:
    Order designation: SMCP xx H

Sealed design

Sizes 8–30 can be supplied with replace­ able sealing sleeves
Series SMCP: Sealed design
Specification sealing (..2RS)

Threaded bolts for Rod Ends

All series of rod ends and spherical bearings, except the sealed ..2 RS design, can be fitted with threaded bolts and used as angle joints. The bolt is pressed and riveted into the inner ring.
Series SMCP: threaded bolts
Specification threaded bolts (..W)
to the top