Productseries SMC.., SMXC.., SMRC..
Universal application at high alternating and shock loads in radial and axial directions. Suitable for large swings. Vmax = 60 m/min.Common features
Friction pairing: Steel on heavy-duty bronzeFemale thread: DIN13-6H, right oder left (left thread: SMLC..)
Lubricating nipple: Size 5 - 50 funnel-type DIN3405, form D
Series SMC
Outer part: Up to size 14 free-cutting steel 1.0718, from size 16 material 1.0501 galvanized and chromalized to DIN 50961.Bushings: Cu Sn 8/Cu Zn 40 Al 2 F59, 2.0550.31.
Inner ring: Roller bearing steel 1.3505, hardened, ground and polished.
Series SMXC (high-strength)
Available from size 5Outer part: Material 1.7225 tempered or similar, galvanized and chromalized to DIN 50961.
Bushings: As for SMC..
Inner ring: As for SMC..
Series SMRC (rustproof)
Available from size 3Outer part: Stainless steel 1.4305, from size 16 forged.
Bushings: as for SMC..
Inner ring: as for SMC.. but hard-chromed, if required stainless steel.
Bearing slackness
Depending on size between 0.01 and 0.09 mm radially. With reduced or increased slacknessDrawing
Design
- Hard-chromed inner ring:
Order designation SMC xx IH - Stainless inner ring:
Order designation SMC xx IR - Hard-chromed outer part and inner ring:
Order designation SMC xx H
Sealed design
Sizes 8–30 can be supplied with replace able sealing sleevesSeries SMC: Sealed design
Specification sealing (..2RS)
Threaded bolts for Rod Ends
All series of rod ends and spherical bearings, except the sealed ..2 RS design, can be fitted with threaded bolts and used as angle joints. The bolt is pressed and riveted into the inner ring.Series SMC: threaded bolts
Specification threaded bolts (..W)